Free shipping to:

America: Canada, USA, Mexico

Africa: South Africa

Asia: Cambodia, China, HongKong, Indonesia, Japan, Macau, Malaysia, Philippines, Singapore, South Korea, Taiwan, Thailand, Vietnam

Europe: Austria, Belgium, Denmark, Finland, France, Germany, Ireland, Netherland, Norway, Sweden, Switzerland, United Kingdom

Oceania: Australia, New Zealand

Russia (not available for far regions, the delivery delay may be 20-45 working days, depending on the destination, please contact us before making your purchase)

For more details, click here...

TH-1 Tiller Head

Pallet truck / stacker motion & lifting control

This TH-1 tiller head supports only Normal Open (NO) type belly button (emergency reverse).

Description:

This tiller head model TH-1 is packaged in a rugged housing that offer an attractive and practical method of controlling 24V electric vehicles. The tiller head TH-1 is widely applied in electric material maneuvering vehicles like forklift and pallet stacker, fully compatible with REMA / CURTIS TH-1.

Equipped with an emergency reverse switch, electronic throttle, and lift and lower switches rated at IP-67, these tiller heads are ideal for both indoor and outdoor vehicles such as pallet jacks, walkies, stackers and tow tractors.

We supply also the traction switch board of TH-1.

Specifications:

• Model: TH-1
• Operating Voltage: 24V DC nominal (19.2V DC - 28.8V DC, absolute)
• Throttle Output: 0.2 - 5.0V DC nominal (0.15V DC - 5.3V DC, absolute)
• Maximum current, output switches: 2A each (lift, lower, horn, turtle)
• Net weight: 1.6 kg

Features:

• Ergonomic design maximizes vehicle and operator productivity while minimizing operator fatigue.
• Nylon PA6-GF30 housing and sealed electronics make the tiller head ideal for use in all types of environments - the tiller head can even be used reliably in the rain.
• Optional proportional switches provide more precise lift and lower control, thereby improving safety.
• A single electrical connector makes wiring easy to install, reducing vehicle assembly costs and eliminating costly wiring errors.
• TH-1 tiller head integrates seamlessly with applicable CURTIS motor controllers, contactors, and instrumentation.

Connector's definition:
	Pin 1: B+ Pin 2: Belly button NO Pin 3: Throttle Pin 4: Lift switch Pin 5: SW2 Pin 6: None Pin 7: None	Pin 8: None Pin 9: B- Pin 10: Forward, 24V active high Pin 11: Reverse, 24V active high Pin 12: Lower Pin 13: SW4 Pin 14: None

TH-1 Tiller Head

Pallet truck / stacker motion & lifting control

This TH-1 tiller head supports only Normal Open (NO) type belly button (emergency reverse).

Description:

This tiller head model TH-1 is packaged in a rugged housing that offer an attractive and practical method of controlling 24V electric vehicles. The tiller head TH-1 is widely applied in electric material maneuvering vehicles like forklift and pallet stacker, fully compatible with REMA / CURTIS TH-1.

Equipped with an emergency reverse switch, electronic throttle, and lift and lower switches rated at IP-67, these tiller heads are ideal for both indoor and outdoor vehicles such as pallet jacks, walkies, stackers and tow tractors.

We supply also the traction switch board of TH-1.

Specifications:

• Model: TH-1
• Operating Voltage: 24V DC nominal (19.2V DC - 28.8V DC, absolute)
• Throttle Output: 0.2 - 5.0V DC nominal (0.15V DC - 5.3V DC, absolute)
• Maximum current, output switches: 2A each (lift, lower, horn, turtle)
• Net weight: 1.6 kg

Features:

• Ergonomic design maximizes vehicle and operator productivity while minimizing operator fatigue.
• Nylon PA6-GF30 housing and sealed electronics make the tiller head ideal for use in all types of environments - the tiller head can even be used reliably in the rain.
• Optional proportional switches provide more precise lift and lower control, thereby improving safety.
• A single electrical connector makes wiring easy to install, reducing vehicle assembly costs and eliminating costly wiring errors.
• TH-1 tiller head integrates seamlessly with applicable CURTIS motor controllers, contactors, and instrumentation.

Connector's definition:

• Pin 1: B+
• Pin 2: Belly button NO
• Pin 3: Throttle
• Pin 4: Lift switch
• Pin 5: SW2
• Pin 6: None
• Pin 7: None
• Pin 8: None
• Pin 9: B-
• Pin 10: Forward, 24V active high
• Pin 11: Reverse, 24V active high
• Pin 12: Lower
• Pin 13: SW4
• Pin 14: None